Welcome Guest [ Login | Register ]

Holden Wiring looms Made to order 

As most pre 1986 factory GMH Holden looms have started to crack and gone hard as a result of heat or have been cut up beyond repair this is where our wiring looms come in as they have been made to replacement the factory loom as they have all new wires and crimps and are made inhouse as close to the factory loom as we can. As some wire colours are no longer made we try to use a wire colour that is as close to the no longer made factory one. Most of  plastic plugs are no longer made aswell so we use good used ones off old looms that we strip down just for the plugs so that we can make the loom fit as per the STD one did. Our looms are made to plug in to the factory plugs so there easy to install as it just plugs up to your cars main wiring loom. Most of our looms made are just engine looms that plug into the main body loom near the brake booster or at the back of the motor the only exception is the HQ & HJ models as these have a plug bolted on the firewall under the brake booster so looms made for these are made from the firewall plug onwards. These come as an Engine loom, Headlight loom  or a  complete  loom.

We can make other looms up or make to your needs as we have a large range of wires and crimps. Drop us an email at capri1276@nkaparts.com or phone on Mob: 0422769015 as to what you need and we will try our best to help you as your wiring does not need to be nightmare. 

HQ, HJ, Holden V8 Engine  loom.  

Above is the main plug of a Holden HQ, HJ as seen there is a bolt in the centre that needs to be removed before the plug can come of the firewall. The HQ ,HJ, V8 & 6cly use the same plugs but have different wire layouts for the wiper motor as the plug shown has the wiper wires in the top some looms have it in the bottom in the headlight plug.

 We can make looms for these Holden models, HK, HT,  HQ, HJ, HX, HZ WB. Torana LH, LX , UC, Commodore VB, VC, VH, VK. 

 Most early holden engine looms have the same colour code

 Red with fusible link to 12v , Purple to starter motor, Yellow to positive side of coil, Brown to Neg side of coil this is for the tacho , Brown to  ALT, Green for water temp, Blue for oil pressure.

Email capri1276@nkaparts.com or Phone us on Mob: 0422769015 for more details on the looms we can make.