Product Information
NEW REWIRED HOLDEN HQ HJ V8 253 308 Complete Engine & Single Headlight wiring harness. ALL MADE UP you just fit it
This wire harness has been rewired as per the STD Loom with new wires & terminals. Looms will fit 308 253 8cl with ALT & coil on the PASSENGERS side.This is used to replace old hard cracked STD engine looms. The one shipped will be a basic 253 308 loom with Tacho, Heater, Wiper Motor, Single Headlight, Indicators &Twin horn wires.
This is a complete loom from fire wall plug forward
To be used in a performance application this loom does not have emission / aircon or idle solenoid wires. It has a 6mm main red (std one is 5mm) with a fusible link, 4mm headlight wire we use heat shrink & we solder the terminals. if you need emission wires and or idle solenoid wire in loom please Email me to order otherwise .
The HQ ,HJ, V8 & 6cly use the same plugs but have different wire layouts for the wiper motor as some models have them top engine loom plug and some in the bottom headlight loom plug.Please look to see if this loom fits your car.
IF YOUR CAR HAS A 6cyl MAIN LOOM AS THIS MAY NOT FIT. Email me so i will make it up to suit you main loom.
As this model loom was made so many ways as STD you will have to make sure this will fit you car or ring . Please allow 2 weeks for item to be made up then sent as these are MADE TO ORDER.
You will have to pull the plastic plug off the firewall then send it back to us as this loom has one on it. As the plugs are not made any more. There is a $30.00 deposit on it that will be refunded once we have received it.
As this item is made to order please contact us for delivery time.
/NKA WIRING LOOMS/HOLDEN HQ HJ V8 Engine Wiring Loom Single headlight